• China Office Hotline
    0086 533 5201284
  • Singapore Hotline
    0065 3163 2969
  • Free Consultancy
    info@decent-machinery.com

Dust Collector

Bag Filter makes up of frame, ash bucket, in-the-box, on-the-box, bag, frame, jet cleaning devices and plc components such as control procedures. In -the -box is the sub-room structure, while working the gas spread out by the dust collecting duct in all ash bucket. Coarse particles directly fall into the ash bucket bottom for wind speed reducing and the ash bucket spoiler role in the collision, fine dust rose with the bag at all between the fine dust was blocked leaving the outer surface of the bag, cleaning gas clearance role with negative pressure ventilation through the bag into the mains from the body into the atmosphere, reaching the purpose of purification.
  • Overview
  • Parameter
  • Application
  • Video
  • FAQ
  • Inquiry
  • Other Products
  • The dust removal efficiency is high, generally over 99%.
  • Wide range of handle air volume. It can be used in flue gas dust removal of industrial furnaces, and reduce atmospheric emissions of pollutants.
  • Simple structure and convenient operation maintenance.
  • On the premise of guaranteeing the same high dust removal efficiency, the cost is lower than the electric dust catcher.
  • It can be run in the condition of high temperature above 200 degrees Celsius.
Model:DMC120-10 Emission concentration:≤50-100mg/m³
Filter area:98 ㎡ Operating temperature:Normal temperature (120°)
Dimensions:2270*2020*6000mm Dust collector air leakage rate:≤1%
Air flow :12000m³/h Dust collector resistance:1200Pa
Number of rooms :1 1The dust collector is under negative pressure :<5000Pa
Dust removal efficiency:99.9% Blow pipe:10 pieces (1.5 inches)
Number of filter bags:120 pcs Number of solenoid valves:10 pieces
Skeleton Specifications:120*1980mm(8 steel wires with silicone on the surface) Pulse valve specifications and models:DMF-Z-40(1.5 inch right angle)
Number of Skeletons:120 sets Cleaning method:Online cleaning
Discharge valve:FBF-200=1 set Compressed air pressure for cleaning:3-6MPa
Filter bag specifications:130*2000mm(120 pieces) Compressed air consumption for cleaning:0.37-0.9m³/min
Filter wind speed :2m/min Centrifugal fan model:4-72-5A 15KW
Filter cloth material:Polyester Needle Felt Air flow:12000m³/h
Inlet concentration:10g/m³ Pressure:2800Pa
Asphalt Plant
Boiler Factory
Cement Plant
Kiln Factory
Metallurgical Plant
Oil Exploitation
Power Plant
Casting Plant
Steelworks
Coal-fired Boiler
Wood-fired Boiler / Carbon Black Factory
Sulfuric Acid Plant
Waste Incineration Boiler 
Pharmaceutical Factory
Grain Elevator
Plastics

Installation Tutorial for Industrial Dust Collectors Baghouse Dust Collector Installation On-Site

FAQ
Q : How long is your Delivery Lead Time ?
A: If there is stock, we can arrange goods at once after we get the payment .If need to be produced, 5-7 working days after receiving payment .
Q : What's kind of your packaging ?
A: Wrapped moisture-proof film on products then packed in wooden cases, or according customer's requirements.
Q : how to consult about dust collector?
A: you just need offer us following information: working situation? Dust or fume characteristic? Filter area? Inlet temperature? Wind velocity? etc... our experts will put forward feasible plan for you ASAP.
Get In Touch
Category
Get in Touch